First crop…let’s see if this stuff grows! Cheers! Rando
Category: 4CELNK-YR No-Waste Cable Clips
4CELNK-YR are a 3D-printed, modern solution to the age-old problem of managing lots of cables.
Ticking off design requirements, one-by-one
2018-027, meeting some design goals. It’s gotta stretch around a 60mm tube without breaking or making much of that bending permanent. 70mm seems a good amount; I didn’t stretch this one past that. Next up, making a bunch of them. Biggest print today, as far as amount of bed surface used. Best regards, Rando
In the beginning…
From this humble beginning, a small hunk of plastic with one broken part, almost fully delaminated from insufficiently-robust stress testing ( 😉 ), I give you: 2018-027 Rando’s Sim Rigging This will be a new line of 3D printed flexible, simple, really cool wire-management brackets for sim-racing rigs. As a promo, I might provide one or two with my 4CELNK brackets, to test the waters. But, if one can be made in <10 minutes, and they can be sold in a set of six for $30 (don’t laugh…people pay me $59 for a machined piece of aluminum angle), and these …
Warnings & Cautions
Please keep the following in mind when using 4CELNK-YR cable clips: Watch for damaged, worn, frayed or otherwise dangerous cables, and replace all that are unsafe. Dangling, partially-secured cords beneath desks, tables, and in shelving can in some instances present electrocution and strangling hazards. Be wary! The 4CELNK-YR arms are closely spaced, and there is spring tension holding them together. Use with care to avoid getting pinched or struck by the arms. 4CELNK-YR Cable Clips are not UL-Listed, they are not specially plenum-rated, nor are they flame-retardant. 4CELNK-YR Cable Clips are not a “safety device”. 4CELNK-YR Cable Clips are not …