4CELNK-YR for Hard Surfaces

Cables! They’re stuffed underneath and behind the desk, the TV and video center, and every other electronic system at home and work. Cables are everywhere! Fix that desk-side mess with stick-on, No Waste 4CELNK-YR flatBack series cable clips.

Now under-desk cable management is easy. These 4CELNK-YR clips let you simply slide the wires in and out. No fasteners, not tools, no muss, no fuss, no bother. Once they’re good and stuck, you add and remove wires at will, and never have to cut another nylon tie-wrap. Each kit or pack includes the proper 3M™ Command Adhesive™ strips to hold them to most smooth flat surfaces.

Click or tap below to view detailed item pages and purchase 4CELNK-YR for your wire shelving racks.

Grand-Opening SALE: 20% off all 4CELNK-YR!

BUY NOW: Show purchasing options and details...

During our early days, we're offering you a 20% off-the-top product discount, calculated at check-out.
Welcome and Thanks! (LFE brackets excluded, since they've been out for years now) Discount offer subject to change at any time.


Tap the photos or links to view more item details.

4CELNK-YR flatBack 9-pc Starter Kit

Start organizing those under-desk, under-foot and in-the-way cables with this Kit.

MSRP: $19.99

Grand-Opening SALE: 20% off all 4CELNK-YR!

4CELNK-YR flatBack 12-pc Small Expansion Pack

To add more clips for smaller sets of cables, get some of these.

MSRP: $22.99

Grand-Opening SALE: 20% off all 4CELNK-YR!

4CELNK-YR flatBack 6-pc Large Expansion Pack

For those larger runs where you need maximum capacity, get a bunch of the wider clips.

MSRP: $22.99

Grand-Opening SALE: 20% off all 4CELNK-YR!

Made to mount on nearly any flat, finished surface

Do I have that kind?...

With computers everywhere theses days, and new devices and their chargers multiplying like cane toads, we all need some cable organization from time to time.

Put a set of 4CELNK-YR cable clips between the things and the systems they work with, and you'll rule the cabled under-(desk)-world!

Under desks, under tables, along back-splashes on countertops, inside and under sound system and other wiring cabinets, closets and panels. Anywhere there's a renegade cable and a suitable surface, 4CELNK-YR can help.

To get started and figure out how much your config will need, start with the 9-piece Starter Kit, in either black or white. Once you get an idea of how much they'll hold, and how you'll run the cabling, you can flesh out the system using larger-quantity Expansion packs: 12 pieces of the small clips, or 6 pieces of the large clips. All 4CELNK-YR flatBack purchases come with 3M™ Command Adhesive™ strips, though the kind, shape and appearance may change as suppliers fluctuate and better solutions are found.

Click the photos or links for color options and more details, or add them directly to your Paypal shopping cart from this page.

How much can 4CELNK-YR flatBack Clips Hold?

Really? How much? (View More...)

The cable area for the small 4CELNK-YR flatBack clips is designed to hold about 4-5 typical "SVT" power cords (UL-Type SVT, 3C/18AWG 300V, ~6mm in diameter), but as you can see, when you get them in there, it will hold 8-ish.

Are you SERIOUS?

The cable area for the large flatBack clips is, well, BIG. It was partially designed for those cases where there's just a mass of cables, and you'd rather get them restrained now, and deal with the organization later. If you do plan to put that many in, be sure you don't overload whatEVER adhesive you've got in use. That and use lots of clips. Yeah...use lots of 4CELNK-YR clips!

This large capacity flatBack clip is easily holding: 9 SVTs, 4 high-end Speaker cables, and four "data" cables. If after all that cap-a-city, you still need more, the next step up is to put multiple clips, giving multiple separate wiring "channels."

Warnings & Cautions

View More...

Please keep the following in mind when using 4CELNK-YR cable clips:

Watch for damaged, worn, frayed or otherwise dangerous cables, and replace all that are unsafe.

Dangling, partially-secured cords beneath desks, tables, and in shelving can in some instances present electrocution and strangling hazards. Be wary!

The 4CELNK-YR arms are closely spaced, and there is spring tension holding them together. Use with care to avoid getting pinched or struck by the arms.

4CELNK-YR Cable Clips are not UL-Listed, they are not specially plenum-rated, nor are they flame-retardant.

4CELNK-YR Cable Clips are not a "safety device".

4CELNK-YR Cable Clips are not specially treated for UV-resistance. Using 4CELNK-YR outdoors, or in a high-UV environment can cause them to age more quickly, and, ultimately, fail sooner.

4CELNK-YR Cable Clips, including the Rack Series, have not been NSF-certified for use in commercial kitchens.

4CELNK-YR cable clips are made from ABS plastic: tough, but not unbreakable. Don't overload the clips.

There may be other hazards associated with your doing with cables whatever it is you're doing. Please always be aware of your surroundings, and be careful.

Easy-Change Cable Management...
...with NO Tools and NO Waste

See the complete 4CELNK product line-up...

4CELNK-YR flatBack Series

Cables! They're stuffed underneath and behind the desk, the TV and video center, and every other electronic system at home and work. Cables are everywhere! Fix that desk-side mess with stick-on, No Waste 4CELNK-YR flatBack series cable clips.

4CELNK-YR Rack Series

Wire shelving racks are used in the home, office, greenhouse, and industrial settings. Route cables neatly along the poles, under or over the shelves, in configurations large and small, with 4CELNK-YR Rack series kits and packs.

4CELNK-YR Tubing Series

Electrical-Mechanical Tubing (EMT) is commonly used in construction and picnic/event canopies. Keep those one-time events from producing permanent tie-wrap waste with reusable, No Waste 4CELNK-YR Tubing series cable clips.


The 4CELNK-YR OR3V Series is specially designed to fit the Obutto R3volution and oZone gaming rigs. By keeping the cables up tight against the rig tubes, they stay nice and neat, and don't get tangled. Your cabling will thank you every race with 4CELNK-YR OR3V series cable clips.


Mount ButtKicker Mini-LFEs to your rig, and feel the gaming like never before. Machined aluminum 4CELNK LFE mounts are available in pairs and sets of four or 5.

4CELNK products are manufactured in Washington state, USA

4CELNK.com Site Map
9-Pc Starter Kit
12-pc Small Pack
6-pc Large Pack
Wire Racks
10-Pc 1-Tier Kit
1.0 8-pc Pack
0.25 8-pc Pack
0.25 LgCap. 8-pc Pk
0.5 10-Pack
0.75 10-Pack
1.0 10-Pack
1.25 10-Pack
9-pc Base Kit
1.25 6-pc Exp. Pk
1.0 3-pc Exp. Pk
Lg Cap 6-pc Kit
LFE Mounts
Set of 5 (2F 3R)
Set of 4 (2F 2R)
Rear Pair
Front Pair
Contact Us
Privacy Policy
Terms of Use
About Us