Cables! They’re stuffed underneath and behind the desk, the TV and video center, and every other electronic system at home and work. Cables are everywhere! Fix that desk-side mess with stick-on, No Waste 4CELNK-YR flatBack series cable clips.
Now under-desk cable management is easy. These 4CELNK-YR clips let you simply slide the wires in and out. No fasteners, not tools, no muss, no fuss, no bother. Once they’re good and stuck, you add and remove wires at will, and never have to cut another nylon tie-wrap. The 9-piece starter kit includes both normal and wide clips, and 3M™ Command Adhesive™ small- and medium-size strips to hold them to most smooth flat surfaces.
This 9-piece pack includes the smaller clips, and 3M™ Command Adhesive™ small-size strips to hold them to most smooth flat surfaces.
4CELNK-YR flatBack 12-pc Small Expansion Pack - BLK (2018-027-106-BLK)  2018-027-105-BLK includes 12 x 4CELNK-YR flatBack Small Cable Clips - BLK 1 x 4CELNK-YR Surface Mount Small Expansion Pack - BLK - Package Insert
| MSRP: US$22.99 |
Made to mount on nearly any flat, finished surfaceDo I have that kind?...  With computers everywhere theses days, and new devices and their chargers multiplying like cane toads, we all need some cable organization from time to time. Put a set of 4CELNK-YR cable clips between the things and the systems they work with, and you'll rule the cabled under-(desk)-world! Under desks, under tables, along back-splashes on countertops, inside and under sound system and other wiring cabinets, closets and panels. Anywhere there's a renegade cable and a suitable surface, 4CELNK-YR can help. To get started and figure out how much your config will need, start with the 9-piece Starter Kit, in either black or white. Once you get an idea of how much they'll hold, and how you'll run the cabling, you can flesh out the system using larger-quantity Expansion packs: 12 pieces of the small clips, or 6 pieces of the large clips. All 4CELNK-YR flatBack purchases come with 3M™ Command Adhesive™ strips, though the kind, shape and appearance may change as suppliers fluctuate and better solutions are found. Click the photos or links for color options and more details, or add them directly to your Paypal shopping cart from this page. | ||||||||||||||||
How much can 4CELNK-YR flatBack Clips Hold?Really? How much? (View More...)
Are you SERIOUS?
This large capacity flatBack clip is easily holding: 9 SVTs, 4 high-end Speaker cables, and four "data" cables. If after all that cap-a-city, you still need more, the next step up is to put multiple clips, giving multiple separate wiring "channels." | ||||||||||||||||
Installing 4CELNK-YR flatBack Cable ClipsUse the included 3M Command Adhesive™ strips (View More...)
I've had really good luck with the foam VHB™ tapes (Very High Bond-Strength™, again from 3M). The thin gray stuff seems to work a lot better on these surfaces than the clear, gel-style adhesives. That was the only kind that held well to unfinished, raw plywood. Now I have to figure out how to get it to you. NOTE: If you're going to get more tape, for reference, the parts are 12.2mm thick, or just under 1/2". I use 1/2" tape despite the overhang. The short clips use 1", and the long clips 2" of tape length. The parts best fit the small and medium Command Adhesive strips, which are quite convenient, but limited in strength. For now, we chose to include some of those small- and medium-sized 3M™ Command Adhesive strips, one strip per clip, sized as appropriate. At this time there's one extra medium-size strip in the package. Use them to mount the clips to painted and solid surfaces, plastic, metal, and laminate.
The official instructions for this type of Command adhesive can be found at the 3M site: https://www.command.com/3M/en_US/command/how-to-use/all-other-hooks/ If you’ve never used them, it’s important to realize that the Command strips are for “household use”, and are only rated for a few pounds (~1 kg). OTOH, a power-cord typically weighs only about 5 ounces (140 gm). Total. So, be wary, and substitute something stronger if your application needs it. The general steps are:
And yes, I'm PAINFULLY aware those two pieces of paper constitute WASTE. At least from that point there will none from moving wires in and out of the clips. TIP: When you're adding and removing cables, it's a good idea to hold the clip in place so the force exerted only when adding the cable doesn't become it's undoing. 4CELNK-YR clips are re-usable, so when it’s time, gently pull the command strip off and reuse the clip.
| ||||||||||||||||
Adding and Removing Cables with 4CELNK-YR flatBack ClipsThere are instructions? (View More...) 
This is just too easy!
| ||||||||||||||||
Warnings & CautionsView More... Watch for damaged, worn, frayed or otherwise dangerous cables, and replace all that are unsafe. Dangling, partially-secured cords beneath desks, tables, and in shelving can in some instances present electrocution and strangling hazards. Be wary! The 4CELNK-YR arms are closely spaced, and there is spring tension holding them together. Use with care to avoid getting pinched or struck by the arms. 4CELNK-YR Cable Clips are not UL-Listed, they are not specially plenum-rated, nor are they flame-retardant. 4CELNK-YR Cable Clips are not a "safety device". 4CELNK-YR Cable Clips are not specially treated for UV-resistance. Using 4CELNK-YR outdoors, or in a high-UV environment can cause them to age more quickly, and, ultimately, fail sooner. 4CELNK-YR Cable Clips, including the Rack Series, have not been NSF-certified for use in commercial kitchens. 4CELNK-YR cable clips are made from ABS plastic: tough, but not unbreakable. Don't overload the clips.
There may be other hazards associated with your doing with cables whatever it is you're doing. Please always be aware of your surroundings, and be careful.
| ||||||||||||||||
Easy-Change Cable Management... |
 |  4CELNK-YR flatBack Series
| |
 4CELNK-YR Rack Series
| ||
 4CELNK-YR Tubing Series
| ||
 4CELNK-YR OR3V Series
| ||
 4CELNK OR3V LFE Mounts
|
